Boxes - WallStairs— CNChub.ru

Settings for Finger Joints

angle
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for plain WallEdges

edge_width

space below holes of FingerHoleEdge (multiples of thickness)

Settings for SlatWallEdges

bottom_hook		"spring", "stud" or "none"
hook_depth		horizontal width of the hook
hook_distance		horizontal space to the hook
hook_height		height of the horizontal bar of the hook
hook_overall_height		height of the hook top to bottom
pitch		vertical spacing of slots middle to middle (in mm)
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
hook_extra_height		space surrounding connectors (multiples of thickness)

Settings for DinRailEdges

bottom		"stud" or "none"
depth		horizontal width of the hook
edge_width		space below holes of FingerHoleEdge (multiples of thickness)

Settings for FrenchCleatEdges

angle		angle of the cut (0 for horizontal)
bottom		"stud", "hook" or "none"
depth		horizontal width of the hook in mm
spacing		distance of the cleats in mm (for bottom hook)
edge_width		space below holes of FingerHoleEdge (multiples of thickness)

WallStairs Settings

walltype		Type of wall system to attach to
sx		sections left to right in mm 🛈
sy		sections back to front in mm 🛈
sh		sections bottom to top in mm 🛈
braceheight		height of the brace at the bottom back (in mm). Zero for none

Default Settings

thickness		thickness of the material (in mm) 🛈
format		format of resulting file 🛈
tabs		width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
debug		print surrounding boxes for some structures 🛈
labels		label the parts (where available)
reference		print reference rectangle with given length (in mm)(zero to disable) 🛈
inner_corners		style for inner corners 🛈
burn		burn correction (in mm)(bigger values for tighter fit) 🛈

You are supposed to add holes or slots to the stair tops yourself using Inkscape or another vector drawing or CAD program.

sh gives height of the stairs from front to back. Note that the overall width and height is bigger than the nominal values as walls and the protrusions are not included in the measurements.

Boxes.py

WallStairs