Макеты для лазерной резки

Boxes.py

RectangularWall

Simple wall

Settings for Cabinet Hinges

bore		diameter of the pin hole in mm
eyes_per_hinge		pieces per hinge
hinges		number of hinges per edge
style		style of hinge used
eye		radius of the eye (multiples of thickness)
play		space between eyes (multiples of thickness)
spacing		minimum space around the hinge (multiples of thickness)

Settings for Click-on Lids

angle		angle of the hooks bending outward
bottom_radius		radius at the bottom (multiples of thickness)
depth		length of the hooks (multiples of thickness)

Settings for Dove Tail Joints

angle		how much should fingers widen (-80 to 80)
depth		how far the dove tails stick out of/into the edge (multiples of thickness)
radius		radius used on all four corners (multiples of thickness)
size		from one middle of a dove tail to another (multiples of thickness)

Settings for Finger Joints

angle
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for rack (and pinion) edge

angle		pressure angle
clearance		clearance
dimension		modulus of the gear (in mm)
profile_shift		Profile shift

Settings for GrippingEdge

outset		extend outward the straight edge
style		"wave" or "bumps"
depth		depth of the grooves

Settings for Hinges and HingePins

grip_percentage
outset		have lid overlap at the sides (similar to OutSetEdge)
pinwidth		set to lower value to get disks surrounding the pins
style		"outset" or "flush"
axle		diameter of the pin hole (multiples of thickness)
grip_length		fixed length of the grips on he lids (multiples of thickness)
hingestrength		thickness of the arc holding the pin in place (multiples of thickness)

Settings for Chest Hinges

finger_joints_on_box		whether to include finger joints on the edge with the box
finger_joints_on_lid		whether to include finger joints on the edge with the lid
hinge_strength		thickness of the arc holding the pin in place (multiples of thickness)
pin_height		radius of the disc rotating in the hinge (multiples of thickness)
play

Settings for Slide-on Lids

angle
hole_width		width of the "finger hole" in mm
second_pin		additional pin for better positioning
spring		position(s) of the extra locking springs in the lid
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle		inside angle of the feet
bottom_stabilizers		height of strips to be glued to the inside of bottom edges (multiples of thickness)
height		height of the feet (multiples of thickness)
holedistance		distance from finger holes to bottom edge (multiples of thickness)
width		width of the feet (multiples of thickness)

RectangularWall Settings

x		inner width in mm
h		inner height in mm
bottom_edge		edge type for bottom edge
right_edge		edge type for right edge
top_edge		edge type for top edge
left_edge		edge type for left edge

Default Settings

thickness		thickness of the material (in mm) 🛈
format		format of resulting file 🛈
tabs		width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
debug		print surrounding boxes for some structures 🛈
labels		label the parts (where available)
reference		print reference rectangle with given length (in mm)(zero to disable) 🛈
inner_corners		style for inner corners 🛈
burn		burn correction (in mm)(bigger values for tighter fit) 🛈