Макеты для лазерной резки

Boxes.py

FlexBox3

Box with living hinge

Settings for Finger Joints

angle
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for Flex

stretch		Hint of how much the flex part should be shortened
connection		width of the gaps in the cuts (multiples of thickness)
distance		width of the pattern perpendicular to the cuts (multiples of thickness)
width		width of the pattern in direction of the cuts (multiples of thickness)

FlexBox3 Settings

x		inner width in mm (unless outside selected)
y		inner depth in mm (unless outside selected)
outside		treat sizes as outside measurements 🛈
z		height of the box
h		height of the lid
radius		radius of the lids living hinge
c		clearance of the lid

Default Settings

thickness		thickness of the material (in mm) 🛈
format		format of resulting file 🛈
tabs		width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
debug		print surrounding boxes for some structures 🛈
labels		label the parts (where available)
reference		print reference rectangle with given length (in mm)(zero to disable) 🛈
inner_corners		style for inner corners 🛈
burn		burn correction (in mm)(bigger values for tighter fit) 🛈