Макеты для лазерной резки

Boxes.py

Dispenser

Dispenser for stackable (flat) items of same size

Settings for Finger Joints

angle
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle		inside angle of the feet
bottom_stabilizers		height of strips to be glued to the inside of bottom edges (multiples of thickness)
height		height of the feet (multiples of thickness)
holedistance		distance from finger holes to bottom edge (multiples of thickness)
width		width of the feet (multiples of thickness)

Dispenser Settings

x		inner width in mm
y		inner depth in mm
h		inner height in mm
slotheight		height of the dispenser slot / items (in mm)
bottomheight		height underneath the dispenser (in mm)
sideedges		edges used for holding the front panels and back

Default Settings

thickness		thickness of the material (in mm) 🛈
format		format of resulting file 🛈
tabs		width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
debug		print surrounding boxes for some structures 🛈
labels		label the parts (where available)
reference		print reference rectangle with given length (in mm)(zero to disable) 🛈
inner_corners		style for inner corners 🛈
burn		burn correction (in mm)(bigger values for tighter fit) 🛈

Set bottomheight to 0 for a wall mounting variant. Please add mounting holes yourself.