Макеты для лазерной резки

Boxes.py

AllEdges

Showing all edge types

Settings for Finger Joints

angle
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for Stackable Edges

angle		inside angle of the feet
bottom_stabilizers		height of strips to be glued to the inside of bottom edges (multiples of thickness)
height		height of the feet (multiples of thickness)
holedistance		distance from finger holes to bottom edge (multiples of thickness)
width		width of the feet (multiples of thickness)

Settings for Hinges and HingePins

grip_percentage
outset		have lid overlap at the sides (similar to OutSetEdge)
pinwidth		set to lower value to get disks surrounding the pins
style		"outset" or "flush"
axle		diameter of the pin hole (multiples of thickness)
grip_length		fixed length of the grips on he lids (multiples of thickness)
hingestrength		thickness of the arc holding the pin in place (multiples of thickness)

Settings for Slide-on Lids

angle
hole_width		width of the "finger hole" in mm
second_pin		additional pin for better positioning
spring		position(s) of the extra locking springs in the lid
style		style of the fingers
surroundingspaces		space at the start and end in multiple of normal spaces
bottom_lip		height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
edge_width		space below holes of FingerHoleEdge (multiples of thickness)
extra_length		extra material to grind away burn marks (multiples of thickness)
finger		width of the fingers (multiples of thickness)
play		extra space to allow finger move in and out (multiples of thickness)
space		space between fingers (multiples of thickness)
width		width of finger holes (multiples of thickness)

Settings for Click-on Lids

angle		angle of the hooks bending outward
bottom_radius		radius at the bottom (multiples of thickness)
depth		length of the hooks (multiples of thickness)

Settings for Flex

stretch		Hint of how much the flex part should be shortened
connection		width of the gaps in the cuts (multiples of thickness)
distance		width of the pattern perpendicular to the cuts (multiples of thickness)
width		width of the pattern in direction of the cuts (multiples of thickness)

Settings for HandleEdge

height		height above the wall in mm
hole_height		height of hole(s) in percentage of maximum hole height (handle height - 2 * material thickness)
hole_width		width of hole(s) in percentage of maximum hole width (width of edge - (n+1) * material thickness)
on_sides		added to side panels if checked, to front and back otherwise (only used with top_edge parameter)
radius		radius of corners in mm
outset		extend the handle along the length of the edge (multiples of thickness)

AllEdges Settings

x

inner width in mm

Default Settings

thickness		thickness of the material (in mm) 🛈
format		format of resulting file 🛈
tabs		width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
debug		print surrounding boxes for some structures 🛈
labels		label the parts (where available)
reference		print reference rectangle with given length (in mm)(zero to disable) 🛈
inner_corners		style for inner corners 🛈
burn		burn correction (in mm)(bigger values for tighter fit) 🛈